zak99b5
-
Posts
467 -
Joined
-
Last visited
-
Days Won
44
Content Type
Profiles
Forums
Gallery
Events
Downloads
Posts posted by zak99b5
-
-
We allow the receiver to pivot to catch the ball. One defender may also pivot to try to intercept. After the pass is completed, the receiver may pivot to run, and all unengaged defenders can pivot to make the tackle.
-
2
-
-
I bought a set of painted white jersey Redskins from Tudor this summer. Are they all out?
-
2
-
-
Nice videos.
On the kickout one, you have a down o-lineman in the backfield. How does that work?
-
1
-
-
On 10/28/2023 at 9:52 AM, nefgm.org said:
If you are looking for a completely new motor this is what you need Super Power Pack 3 – ITZ Bases. Tudor may be working with ITZ to offer these motors, but I don't think it has happened yet.
That motor looks a bit similar to the GBN motor I now use on the Ultimate field. Same magnetic mounting At about $50, the GBN cost less than half of the ITZ motor though.
-
2
-
-
That's funny, because my Ultimate already came with an AC plug and converter to power the regular motor. The battery spot on the play action remote was taped shut.
-
2
-
-
I looked for info on the new Ultimate motor but saw nothing on the website.
-
2
-
-
Funny--in the lineman scenario, I'd put him at right guard or tackle. I like my O linemen to curve to the center and form a wall, behind which the RB can run. Of course you can swap them to the other side when needed for the specific play at hand...
-
2
-
-
No "foot to the head" personal foul, even out of bounds??
-
2
-
-
Bases that don't seem to work at all are great candidates for your initial tweaking tries. It's already "bad," so you can't really ruin it. But you just might improve it!
-
4
-
-
Welcome (back).
The Ultimate Board is great. That said, I did add a second motor to make it better, then replaced those with a GBN electrostatic motor, which is excellent for the ultimate.
Additionally, in our league we use all 620 boards. Each team has its own home board. For the championship game, we break out the Ultimate though.
Other's will chime in more about bases, but the strength invisibases seem to work pretty well out of the box. Useful for linemen.
Uniforms I found too difficult to put numbers on nicely and to follow the contours very well. They look like guys with stickers on them. So I gave up. I'm sure some practice would yield better results, but I prefer the look of painted figures anyway.
-
2
-
-
For an onsides kick in our league, we line up 5 kicking team players at their own 34. Receiving team lines up 6 players at their own 46.
Kicking coach drops the ball where he wants anywhere over the 45 yardline. If needed (almost always) the ball is then moved straight forward or back to the 45 yardline from where it came to rest.
Coaches point players, and the board is turned on. First player to touch ball recovers it, and it cannot be advanced.
The thinking:
--ball is ten yards ahead of kickoff spot, where it's legal for either team to recover it
--receiving team has the advantage of an extra player AND is closer to the ball (9 yards away vs. 11 for the kicking team), making successful attempts fairly rare but achieveable, like it was in the NFL until a couple seasons ago
--randomness (to a degree) of where along the 45 yardline that the ball actually ends up simulates the bounces of a real ball and forces the coaches not to bunch all the players in one small spot
-
2
-
-
Our league forbids stacking, except for the QB under center. All other players need to be at least a base-length behind a teammate in front of them.
This allows a RB (or even two) directly behind the QB, so long as it's a base length. And since RBs have to be 10 yards off the LOS to be elegible for the automatic handoff anyway, this puts them only two yards (620 fields) deeper than that.
-
2
-
-
Only stop we have is for a pass attempt.
This game is best when the switch is on. Let the players decide the outcome.
-
4
-
1
-
-
1 hour ago, Coach Shawn said:
We use felt under the base to create a standstill player. Our rule is that the felt is part of the base. So if it sticks out and is touched it is equal to touching the base.
I'd be breaking out the scissors lol.
-
4
-
-
Re: the freeze frame--
Makes total sense to me to count that as part of the QB's base. It's extra equipment that gives a benefit, but there's also the drawback of a bigger footprint. Seems to work out.
Your other option (what we do) is to use a TTC base with the dial set at 90* for the QB to spin (basically) in place. Or set it to an arc, put it on backward, and have the QB roll out.
-
3
-
-
I'd agree with Carl. Sack. Other O player tried blocking the defender, but failed.
-
5
-
1
-
-
Agreed--good thread with good thoughts. I get a lot out of reading other people's rules and play style, and I have incorporated quite a few.
-
2
-
1
-
-
My rationale for thinking that's offensive holding:
The OL player is "unnaturally" preventing the defender from sacking the QB. It's unnatural because he's not standing up.
Of you say it's ok because it's not an arm, then what's to prevent a coach from setting up linemen laying down from the start?I get the whole "realism" part of the tie pro rule about a figure's arm, but these are just static figures. Holding in real football kinda requires that the guilty party do something extra to hold.
The OL is doing something extra (lying down) to stop the defender's rushing the passer.
-
2
-
1
-
-
Since the fallen O-lineman is preventing the defender from making the sack, I think I'd be inclined to call that "holding." Lose ten yards, replay the down.
-
2
-
1
-
-
I've found transparancy film (like for use with the old overhead projectors) works nicely to replace the "cleats" on these figures. Needs to be cut perfectly square.
It's a little hard to snap off the bottom off to replace the cleats, so I'd do that before painting. Otherwise you run the risk of chipping the paint.
-
3
-
-
Pics of the build would be great.
-
2
-
-
Those look good. Just something about all painted teams. Nostalgia? Maybe.
People have made fantastic, realistic, and detailed teams, but I find each layer of detail added can make one think of the inevitable details that are not there. Kinda like diminishing returns.
And when I'm playing a game, I'm not thinking about TV numbers or names on jerseys.
-
2
-
-
What I'd like to see offered is the old 620-style field. Sold as board only and as a complete game set. Use the new motors and sell field covers. Even a Super Bowl edition would be sweet.
TTC dials that don't have a notch in the rear of the disc, so opponents can't see if your QB is set to spin in place.
Mean 13 with necks.
-
3
-
-
To keep it simple, you could use a 620-sized field cover.
-
3
-
Revisiting 2 motors on ultimate board (need Help)
in Game Boards
Posted
I needed to make a momentary switched extension cord to use the GBN motor.
I found a push-button momentary switch at home cheapo. Also bought two extension cords.
On one of the cords, I fit the switch between the blades of the plugs and utilized the holes in them for the terminal screws on the switch. Taped it all up well. Clipped the other end of that cord off.
On the other cord I cut one of the wires (hot side, but it doesn't reall matter) near the female plug end. Stripped back the insulation on the cut wires there and at the end of the cord with the switch. I used heat-shrink butt connectors and crimped the switch cord into the other, so now it's a dogleg.
I made a second one, and all our board's switches are always turned to ON and we use the momentary switch to control the action. Works great.